Mouse Micro-switch Preloading: A Mechanical Compensation Logic to Eliminate “Pre-travel”

  1. ホーム
  2. ニュース
  3. 技術概要
  4. Mouse Micro-switch Preloading: A Mechanical Compensation Logic to Eliminate “Pre-travel”

The essence of the preloading process for mouse micro-switches lies in applying a constant, controllable downward force between the button cover and the micro-switch. This ensures that the button plunger remains in direct contact with the micro-switch actuator even when the button is at rest, thereby eliminating any “pre-travel” (or “dead travel”) caused by manufacturing tolerances and assembly gaps. This technique does not address “trigger sensitivity”; rather, it ensures consistency in the tactile feel during the initial phase of a press. In a mouse without preloading, the initial downward movement is essentially a “chase” to catch up with the micro-switch actuator, resulting in a vague, hollow tactile sensation and a hollow-sounding click. With preloading, the force is transmitted to the micro-switch the instant the finger begins to move.


 

I. The Origin of Pre-travel

In a conventional mouse, a physical gap exists between the button cover and the micro-switch. This gap stems from two sources: tolerances inherent in the injection-molding process and positional deviations between the button cover and the micro-switch PCB during assembly.

When a finger presses the button, the button cover must first traverse this gap before making contact with the micro-switch actuator. This distance covered before contact is known as “pre-travel.” During this phase, the resistance felt by the finger is primarily due to the elastic deformation of the plastic button cover itself, rather than the tactile feedback from the micro-switch’s internal spring mechanism. Consequently, the initial part of the press feels “vague” or “mushy,” the click sounds “hollow,” and the extent of pre-travel can vary—not only between different mice but even between the left and right buttons of the same device.

Patent literature explicitly notes that in typical mouse designs, the tactile feedback does not begin at the very start of the button’s travel; instead, it only becomes perceptible after approximately 0.05mm of movement—a characteristic that leads to a suboptimal clicking experience.

 

II. The Mechanical Logic of Pre-tensioning: Using Springs to “Tighten” the Buttons

The core of the pre-tensioning process involves placing an elastic element—such as a torsion spring, a wire retaining clip, or a floating mount—beneath or behind the keycap. This component exerts a constant downward force, ensuring that the key stem remains in continuous contact with the micro-switch plunger.

This force must be precisely controlled. If the force is too weak, the “pre-travel” (the gap before the switch actuates) will not be fully eliminated. Conversely, if the force is too strong, it will exert constant pressure on the micro-switch’s internal metal leaf spring, altering the actuation force required, accelerating mechanical fatigue, and potentially causing issues like a “lighter” feel or unintended double-clicking.

Logitech’s button pre-tensioning system is an early example of this approach. In the G102, a small torsion spring is positioned beneath the key stem; the resulting pre-tensioning force gently presses the stem downward, maintaining contact with the micro-switch plunger. A hook at the top of the spring sits within a retaining slot, preventing the spring from applying excessive downward pressure. The tensioning system in the G Pro Wireless (GPW) is more complex: three torsion springs are secured to a dedicated structural component, with the force applied to the rear of the key stem. Because the lever arm is shorter, the pre-tensioning force in the GPW is lower than in the G102, resulting in a less pronounced impact on the micro-switch’s tactile feel.

Rapoo’s “C+click” technology takes a different path: it separates the PCBs for the left and right micro-switches from the main motherboard and incorporates dedicated pre-tensioning torsion springs. According to the manufacturer, this design reduces the gap between the micro-switch contacts and the button, shortens the return travel, and minimizes pre-travel. The use of independent PCBs also allows for individual tuning of the left and right buttons, helping to ensure a consistent feel regardless of a player’s specific grip style.

Dareu’s “KBS 2.0” (Key Balance System) utilizes a “floating mount” structure. This mount pushes downward against the key stem, providing a constant pre-tensioning force. The downward displacement is kept to an absolute minimum—just enough to make contact—thereby eliminating pre-travel while exerting the least possible influence on the micro-switch’s original tactile characteristics. The design described in patent CN224400271U utilizes a snap ring combined with a counter-tension arm. The preload from the snap ring is applied to the button assembly via this arm, balancing the tension generated by the spring arm at the button end. This ensures that the downward pressing force aligns with the switch’s feedback force. Furthermore, as the button rebounds, the snap ring restricts the travel of the button plunger, preventing it from striking the frame—thereby improving both the sound and the tactile feel.

 

III. The Limits of Preloading: Whether It’s an “Optimization” or a “Detriment” Depends on the Magnitude of Force

The core challenge of the preloading process lies in the precision of force control.

The positive effects are clear: pre-travel (dead space) is eliminated, allowing for an “instant” response; the sound becomes more solid (as the button plunger no longer strikes the microswitch housing); and the tactile consistency between the left and right buttons is improved.

Conversely, the risks are equally real. If the preload is too high, the microswitch plunger remains under constant pressure even when the button is not being pressed, keeping the internal contact spring in a state of pre-deformation. This leads to two issues: a lighter actuation force (which users may perceive as the button feeling “mushy” or prone to accidental clicks) and a potential reduction in the microswitch’s lifespan due to prolonged mechanical stress. In the case of the Logitech G102, users reported that its torsion-spring preloading system exerted excessive force, resulting in a “lighter” feel and even double-clicking issues; the community-devised solution was to disassemble the mouse and remove the torsion spring.

Therefore, the engineering objective of preloading is not to “apply as much force as possible,” but rather to “apply just enough force.” The magnitude of this force must be carefully calibrated based on the microswitch’s actuation force curve, the material rigidity of the button cover, and the desired tactile feel. The Logitech GPW, for instance, minimizes the impact of preload on the button’s feel by shortening the lever arm—a precise adjustment made right at this critical threshold.

 

IV. Distinction from “Adjustable Actuation”

It is important to distinguish microswitch preloading from the “adjustable actuation” found in magnetic or optical switches.

Preloading addresses mechanical clearance—the physical gap between the button plunger and the microswitch. It does not alter the actual actuation point of the microswitch itself; rather, it ensures that force is transmitted to the switch sooner. Adjustable actuation refers to the electrical threshold—the specific point along the switch’s travel distance at which an input is registered as “triggered.” This feature requires sensors capable of outputting continuous positional data, such as those found in magnetic switches or optical switches.

The two concepts can coexist: preloading eliminates mechanical dead travel (pre-travel), while adjustable actuation allows for the configuration of the electrical trigger point. Preloading itself does not offer “programmability”; it is a mechanical parameter—either set at the factory or adjusted by the user through physical means (such as a set screw).

The Manufacturing Process of Bamboo Keyboard Casings
EPOMAKER Bamboo75: When Natural Bamboo Becomes an “Acoustic Chamber” for a Keyboard
メニュー